Hydraulic directional control valve troubleshooting, in only half of the time given by Leo, AAK HYDRAULIC VALVE used Fluororubber Sealing Ring and solved the problem of the hydraulic directional control valve troubleshooting that the other hydraulic valve manufacturers have not been able to solve, so that Leo can sleep at ease.
This morning, just after reading the emails in the office and preparing for a cup of coffee, my colleague forwarded me an international express. I was a little surprised that there was no parcel notice from any customer, who sent the hydraulic valves to AAK?
Will it be a complaint? I haven't met this for several years. I opened the package in fear. There are 5 new hydraulic valves inside. After simple inspection, they should be hydraulic directional valves. Looking at the sending address and person, it turns out that it belongs to the old customer Leo. This guy likes to make this sudden attack.
Open the face book and I ask him, these are hydraulic directional valves. What do you need me to do? Leo said, hydraulic directional control valve troubleshooting, can you do it? I'm not good at the hydraulic directional control valve troubleshooting. He didn't reply. I immediately joked that I'm not good at the hydraulic directional control valve troubleshooting, which doesn't mean that AAK HYDRAULIC VALVE is also not good at the hydraulic directional control valve troubleshooting. AAK HYDRAULIC VALVE valve has its own technical team, which can help you on the hydraulic directional control valve troubleshooting.
Leo commanded that I have 3 hours to go to bed. Give you 2.5 hours to finish the hydraulic directional control valve troubleshooting. I need to know where the hydraulic directional control valve troubles are and your solutions to the hydraulic directional control valve troubleshooting.
After learning about his use scenarios of these hydraulic directional valves and media, I immediately asked AAK HYDRAULIC VALVE technical team to finish the hydraulic directional control valve troubleshooting within 2 hours. The AAK HYDRAULIC VALVE technical team simulated the use scenario of Leo's hydraulic directional valves under the pressurization and flow scenario. The test report came out soon. There were problems with the sealing rings of these hydraulic directional valves. At the same time, we suggested him use Fluororubber sealing ring to seal this hydraulic directional valve.
We took 1.5 hours to finish the hydraulic directional control valve troubleshooting, which is just half of the time given by Leo. After learning the result, Leo was relieved and could sleep at ease.
The story turned out to be this: Leo purchased some hydraulic directional valves, 30% of the hydraulic directional valves have flow parameter problems. The hydraulic valve manufacturer has not been able to have solutions to the hydraulic directional control valve troubleshooting. The boss is very unhappy.
I told Leo that nearly 90% of the domestic hydraulic valve manufacturers use either silicone sealing rings or nitrile rubber sealing rings. They rarely think about different media and different hydraulic scenes or use the appropriate sealing rings according to the media. They all follow the market, just use what other people use. We AAK HYDRAULIC VALVE, as early as 5 years ago, have carried out material analysis for the pain points of sealing rings. After comparison, we have formulated different parameter requirements, different media and different scenarios to correspond to sealing rings of different materials. For example, the sealing performance and stability of fluororubber sealing ring are most suitable for the hydraulic directional valves purchased by Leo.
AAK has targeted Technology on the hydraulic directional control valve troubleshooting, contact AAK if you have needs for the hydraulic directional control valve troubleshooting.
AAK HYDRAULIC VALVE (92) 2021-10-23
